Koobee A660

May 9, 2014, 10:21 am

ROM Phone Koobee A660 - ROM Android 2.3.6

Official ROM Koobee A660 version: A660.KB.V2.14

Google service include – No Rooted

Language support: EN/CN

Install ROM:

- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6575_Android_scatter_emmc.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.

- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !

- You can now safely disconnect your phone and turn it on.

↧

Koobee S1

July 29, 2014, 6:17 pm

≫ Next: Koobee i93

≪ Previous: Koobee A660

ROM Phone Koobee S1 – ROM Android 4.2.2

ONLY MT6582

Official ROM Koobee S1 version: S1.V2.00 – KA55_02

Gapps include – No Rooted

Language support: EN/CN/TW

Install ROM:

- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6582_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.

- You can now safely disconnect your phone and turn it on.

↧

Koobee i93

September 25, 2014, 5:27 pm

≫ Next: KOOBEE Max 7

≪ Previous: Koobee S1

ROM Phone Koobee i93 – ROM Android 4.2.1

ONLY MT6589

Official ROM Koobee i93 version: i93.KB.V2.12 – KA59M_KB_02 – hsimobile89_wet_jb2

Gapps include – No Rooted

Language support: EN/CN/TW

Install ROM:

- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6589_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.

- You can now safely disconnect your phone and turn it on.

↧

KOOBEE Max 7

November 23, 2014, 6:34 am

≫ Next: Koobee i50

≪ Previous: Koobee i93

ROM Mobile Koobee Макс X7T – ROM Android 4.2.1

Официальный ROM Koobee Макс X7T версия: MAX.X7T.V2.08 – Для Векслер ZEN5

Языковая поддержка: EN / CN / RU

Deodex

Установите диск:

CWM

Шаг 1: Загрузите пользовательский ROM копируется на внешние SD карты корневого каталога
Шаг 2: состояние отключения. Удерживая:
            -. Кнопка питания + громкость с помощью кнопок вверх, чтобы войти в режим восстановления
            – Wipe Data / Factory Reset -> Удалить все данные пользователя
            – Wipe кэш-раздела -> Wipe кэша
Шаг 3: Возвращение к восстановлению основной интерфейс установить почтовый из SDCard -> выбрать почтовый из SDCard -> Выбрать ROM
Шаг 4: Brush перезагрузите требуется телефон Терпение – первая загрузка займет некоторое время,

Translation	Select Show>
ROM Mobile Koobee Max X7T – ROM Android 4.2.1 Official ROM Koobee Max X7T version: MAX.X7T.V2.08 - For Wexler ZEN5 Language support: EN / CN / RU Deodex Install: CWM Step 1: Load the custom ROM is copied to the external SD card root directory Step 2: disable state. Hold: -. The power button + volume with up to enter into recovery mode - Wipe Data / Factory Reset -> Delete all user data - Wipe cache partition -> Wipe Cache Step 3: Return to the restoration of the main interface to install zip from SDCard -> choose zip from SDCard -> Select ROM Step 4: Brush restart the phone requires patience - first boot will take some time

Translation

Select Show>

↧

Koobee i50

December 7, 2014, 6:44 pm

≫ Next: Koobee i96T

≪ Previous: KOOBEE Max 7

ROM Mobile Koobee i50 - ROM Android 2.3.6

Update Official ROM Koobee i50 version: i50.KB.V3.02

—————————————————————————————————

Official ROM Koobee i50 version: i50.KB.V3.00

Gapps not include – No Rooted

Language support: EN/CN

Install ROM:

- You can now safely disconnect your phone and turn it on.

↧

Koobee i96T

December 7, 2014, 6:54 pm

≫ Next: Koobee T600

≪ Previous: Koobee i50

ROM Phone Koobee i96T - ROM Android 4.2.1

Update Official ROM Koobee i96T version: i96T.KB.V2.07

——————————————————————————————————————–

Official ROM Koobee i96T version: i96T.KB.V2.06

Gapps include – No Rooted

Language support: EN/CN

Install ROM:

- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6589_Android_scatter_emmc.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.

- You can now safely disconnect your phone and turn it on.

↧

Koobee T600

January 14, 2015, 10:00 am

≫ Next: Koobee halo H2

≪ Previous: Koobee i96T

ROM MobileKoobee T600 - ROM Android 4.1.2

Official ROM Koobee T600 version: T600.KB.V2.09 – hsimobile17_twn_td_jb

Gapps include – No Rooted

Language support: EN/CN

Install ROM:

- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6577_Android_scatter_emmc.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.

- You can now safely disconnect your phone and turn it on.

↧

Koobee halo H2

April 21, 2015, 6:16 pm

≫ Next: Koobee X903S

≪ Previous: Koobee T600

ROM Phone Koobee halo H2 - ROM Android 4.4.4

ONLY MT6752

Official ROM Koobee halo H2 version: H2.V2.02 – KTU84P

Gapps include – No Rooted

Language support: EN/CN/TW

Install ROM:

- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6752_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.

- You can now safely disconnect your phone and turn it on.

↧

Koobee X903S

July 15, 2015, 6:05 pm

≫ Next: Koobee H3

≪ Previous: Koobee halo H2

ROM Mobile Koobee X903S - ROM Android 4.4.2

ONLY MT6592

Official ROM Koobee X903S version: X903S.V2.08 – freemeos 5.10 – k551-user 4.4.2 KOT49H

Gapps include – No Rooted

Language support: EN/CN/TW

Install ROM:

- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6592_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Download Only" or if upgrade "Firmware upgrade"
- Turn off your phone, remove the battery (if the battery is removable) and replace it after some seconds (and don't turn on the phone).

- Press “Download” button to start
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !

- You can now safely disconnect your phone and turn it on.

↧

Koobee H3

September 5, 2015, 3:48 pm

≫ Next: Koobee M6

≪ Previous: Koobee X903S

ROM Mobile Koobee H3 - ROM Android 4.4.4

ONLY MT6752

Official ROM Koobee H3 version: H3.V2.09 – k505-user 4.4.4 KTU84P – freemeos 5.10

Gapps not include – No Rooted

Language support: EN/CN/TW

Install ROM:

- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6752_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Download Only" or if upgrade "Firmware upgrade"
- Turn off your phone, remove the battery (if the battery is removable) and replace it after some seconds (and don't turn on the phone).

- You can now safely disconnect your phone and turn it on.

↧

Koobee M6

June 13, 2016, 5:31 am

≫ Next: Koobee P1S

≪ Previous: Koobee H3

ROM Phone Koobee M6 - ROM Android 5.1

ONLY MT6735

Official ROM Koobee M6 version: M6.V2.03 – full_pri6735_66t_v_l1-user 5.1 LMY47D

Gapps not include – No Rooted

Language support: EN/CN/TW

Install ROM:

- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6735_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Download Only" or if upgrade "Firmware upgrade"
- Turn off your phone, remove the battery (if the battery is removable) and replace it after some seconds (and don't turn on the phone).

- You can now safely disconnect your phone and turn it on.

↧

Koobee P1S

June 28, 2016, 3:13 pm

≫ Next: Koobee P1S – Halo 7 Mod stock

≪ Previous: Koobee M6

ROM Mobile Koobee P1S - ROM Android 5.1

ONLY MT6592

Official ROM Koobee P1S version: P1S.V2.03 – full_prize6592_lwt_l-user 5.1 LMY47I

Gapps include – No Rooted

Language support: Multilang

Install ROM:

- You can now safely disconnect your phone and turn it on.

↧

Koobee P1S – Halo 7 Mod stock

August 23, 2016, 4:28 am

≫ Next: koobee H1S

≪ Previous: Koobee P1S

Pre-rooted Halo 7 Mod stock for Koobee P1S

Based on stock firmware of Halo 7 Build number V2.16 (March 21 2016)

Features :

1) Firmware flashable by SP Flash Tool
2) DEBLOATED
3) Added SuperSU version 2.76
4) Added Busybox version 1.24.2

PLEASE FOLLOW CAREFULLY ALL THE STEPS AT THE NEXT LINK :

http://www.chinaphonearena.com/forum/Thread-ROM-Koobee-Halo-7-mod-stock-for-Pepsi-P1S?pid=56655#pid56655

↧

koobee H1S

October 24, 2016, 5:04 am

≫ Next: Koobee A790T LeWa

≪ Previous: Koobee P1S – Halo 7 Mod stock

Categories:

koobee H1S Android Kitkat 4.4.2

(Read more...)

↧

Koobee A790T LeWa

August 30, 2013, 3:13 pm

≫ Next: Koobee i96T MIUI

≪ Previous: koobee H1S

ROM Koobee A790T – ROM Android 4.2.1 LeWa

Features ROM:

Ported Amoi N828 LeWa on Koobee A790T

Gapps not include

Language support: EN/CN

Install ROM:

CWM

1) Download the custom ROM copied to an external SD card root directory
2) Download the recovery.img ( put in your SD card )
3) Start MobileUncle Tools ( Download on Goolge play )
4) Select Update Recovery ( choose recovery.img )
5) Mobile reboot in CWM and follow the instructions( if recovery is in chinese look tutorial "CWM for MTK Platform" )
Into the recovery:
– Wipe Data / Factory Reset -> delete all user data
- Return to recovery main interface Install zip from sdcard -> choose zip from sdcard -> Select your ROM
- Brush complete, restart the phone Patience required – first boot takes a whil

↧

Koobee i96T MIUI

August 30, 2013, 3:28 pm

≫ Next: Koobee MAX X7 LeWa

≪ Previous: Koobee A790T LeWa

ROM Koobee i96T – ROM Android 4.2.1 MIUI

Features ROM:

MIUI v5 – 3.8.2

Ported Xiaomi on Koobee i96T

1 due to red rice ROM itself camera only supports 800W, plus hands no official ROM, so the camera can only default 800W pixels;
2 RF optimization;
3 smooth without Caton;
4 Optimize GPS, accuracy is better than the MIUI default;
5 Data truly dual-card switching, but due to red rice millet ROM made models limit, so you must use the phone name "red rice phone", otherwise it is impossible dual card texting.
6 shows the charge off "charge abnormally, putting out the charger," because there is no official end package can not be repaired, big does not affect use.

Gapps not include

Language support: EN/CN

Install ROM:

CWM

Step 1: Download the custom ROM copied to an external SD card root directory
Step 2: the shutdown state. While holding down:
            – Power button + volume button up, to enter the recovery mode.
            – Wipe Data / Factory Reset -> delete all user data
            – Wipe Cache Partition -> Wipe cache
            – Advanced -> Wipe Dalvik Cache
Step 3: Return to recovery main interface Install zip from sdcard -> choose zip from sdcard -> Select your ROM
Step 4: Brush complete, restart the phone Patience required – first boot takes a while

↧

Koobee MAX X7 LeWa

August 30, 2013, 3:56 pm

≫ Next: Koobee MAX X7 MIUI

≪ Previous: Koobee i96T MIUI

ROM Koobee Max X7 - ROM Android 4.2.1 LeWa

Features ROM:

LeWa Version: MAX-X7-20130816-234238

1 pro-test call data wifi bluetooth camera compass, GPS and other sensors are normal,
2.Add INIT.D optimize startup scripts and V6
3.boot saving technology
4.sony image display engine
5 dialing and power optimization
6.gps optimize, host advertising shield
7 Join V4A Audio Driver and Sound Manager, the latest version, and integrated Baidu input method
8 fluency developer mode, open the window to zoom animation, transition animation when zooming and animation program length adjustment from the default 1X 0.5X modified to turn off the animation or you can get the same official ROM and smooth experience.
9 according to the battery capacity and CPU X7 frequency RF optimization
10 Fixed default theme icon size
11 streamlined out dynamic wallpaper and Le Frog application market / game center / play machine manual / MTK Kit Wizard, which are not common components to reduce memory footprint
12 oil does not require Google and Le Frog a letter can be further streamlined / system / app app beginning of all g delete all.
13 boot memory 50 or so. Everyday memory footprint around 70.
14 Most of the new lock screen can be used successfully in the X7.
15.stagefright load optimization framework
16 Speed Memory Card Reader
17 Media Flow Optimization
18 virtual machine performance tuning, stable and practical.
19 The picture and video quality optimization.

Gapps not include

Language support: EN/CN

Install ROM:

CWM

1) Download the custom ROM copied to an external SD card root directory
2) Download the recovery.img ( put in your SD card )
3) Start MobileUncle Tools ( Download on Goolge play )
4) Select Update Recovery ( choose recovery.img )
5) Mobile reboot in CWM and follow the instructions( if recovery is in chinese look tutorial "CWM for MTK Platform" )
               Into the recovery:
            – Wipe Data / Factory Reset -> delete all user data
            – Wipe Cache Partition -> Wipe cache
- Return to recovery main interface Install zip from sdcard -> choose zip from sdcard -> Select your ROM
- Brush complete, restart the phone Patience required – first boot takes a while

↧

Koobee MAX X7 MIUI

August 30, 2013, 4:04 pm

≫ Next: Koobee MAX X7 Sony

≪ Previous: Koobee MAX X7 LeWa

ROM Mobile Koobee Max X7 - ROM Android 4.2.1 MIUI

Features ROM:

MIUI v5 – 3.8.23

1.apk for odex of
2.zipaliang Optimization
3.Add say it is workable boot saving technology
4 join gps optimization, positioning faster
5.host advertising shielding
6 kernel add init.d script support
7 Join V6 power optimization script, V4 sound
8 Touch / dial / virtual machine performance / image display optimization
9.sony image display engine to join, most people praise Oh
10 Join Brush finished automatically restart script, without having to manually restart
11.build project other minor optimization
12 The conventional double clear way into the brush to brush machine, brush machine do not double clear, so clean out V6 optimize material have other feedback Replies bug, thank you!
13 first start please be patient

Gapps include

Language support: Multilang ( Normally )

Install ROM:

CWM

1) Download the custom ROM copied to an external SD card root directory
2) Download the recovery.img ( put in your SD card )
3) Start MobileUncle Tools ( Download on Goolge play )
4) Select Update Recovery ( choose recovery.img )
5) Mobile reboot in CWM and follow the instructions( if recovery is in chinese look tutorial "CWM for MTK Platform" )
               Into the recovery:
            – Wipe Data / Factory Reset -> delete all user data
            – Wipe Cache Partition -> Wipe cache
- Return to recovery main interface Install zip from sdcard -> choose zip from sdcard -> Select your ROM
- Brush complete, restart the phone Patience required – first boot takes a while

↧

Koobee MAX X7 Sony

August 31, 2013, 3:55 pm

≫ Next: Koobee MAX X7

≪ Previous: Koobee MAX X7 MIUI

ROM Phone Koobee Max X7 - ROM Android 4.2.2

Features ROM:

1 pro-test call data wifi bluetooth camera compass, GPS and other sensors are normal,
2.Add INIT.D optimize startup scripts and V6
3.boot saving technology
4.sony image display engine
5 dialing and power optimization
6.gps optimize, host advertising shield
7 call data wifi bluetooth camera compass, GPS and other sensors are normal,
8 fluency developer mode, open the window to zoom animation, transition animation when zooming and animation program length adjustment from the default 1X 0.5X modified to turn off the animation or you can get the same official ROM and smooth experience.
9 according to the battery capacity and CPU X7 frequency RF optimization
10 Fixed default theme icon size
11 streamlined out dynamic wallpaper and Le Frog application market / game center / play machine manual / MTK Kit Wizard, which are not common components to reduce memory footprint
12 oil does not require Google and Le Frog a letter can be further streamlined / system / app app beginning of all g delete all.
13 boot memory 50 or so. Everyday memory footprint around 70.
14 Most of the new lock screen can be used successfully in the X7.
15.stagefright load optimization framework
16 Speed ??Memory Card Reader
17 Media Flow Optimization
18 virtual machine performance tuning, stable and practical.
19 The picture and video quality optimization.
20 Sony original camera only for Sony, has been replaced with the official version of the interpolation rear camera front 500w 1300w

Gapps not include – Rooted

Language support: EN/CN

Install ROM:

CWM

1) Download the custom ROM copied to an external SD card root directory
2) Download the recovery.img ( put in your SD card )
3) Start MobileUncle Tools ( Download on Goolge play )
4) Select Update Recovery ( choose recovery.img )
5) Mobile reboot in CWM and follow the instructions( if recovery is in chinese look tutorial "CWM for MTK Platform" )
               Into the recovery:
            – Wipe Data / Factory Reset -> delete all user data
            – Wipe Cache Partition -> Wipe cache
- Return to recovery main interface Install zip from sdcard -> choose zip from sdcard -> Select your ROM
- Brush complete, restart the phone Patience required – first boot takes a while

↧

Koobee MAX X7

November 21, 2013, 6:33 pm

≫ Next: Koobee MAX X7T

≪ Previous: Koobee MAX X7 Sony

ROM Mobile Koobee Max X7 - ROM Android 4.2.1

Features ROM:

1 Based on the latest official end of the latest adaptation of native Android 4.2.1 package
2 Personal data pro-test call wifi bluetooth camera sensors are normal
3 extremely streamlined Google app frameworks and other libraries and ringtone library and the drive and dynamic wallpaper and wallpaper library.
4 Add INIT.D start and V6 optimization script
5.boot saving
6.sony image display engine
7.build small Optimization
8.gps optimize, host advertising shield
9.HOLO starter ized, modify desktop layout, adding five format settings Desktop shortcut / alternative graphics clock digital clock widget, more beautiful / 5 * 4 desktop icon layout to accommodate more icons.
10.LEWA system replacement icons, desktop, nice
11 fresh wallpaper from xda a
12 dual sim dual display, single card single signal display
14 to maintain the original flavor of the unmodified battery icon
15 Join V4A Audio Driver and Sound Manager and integrated kinguser authorization management and RE Manager, no other promotional integration, clean, pure
16 default and turn off the screen automatically rotates an unknown source.
17. According X7 battery capacity and CPU frequency RF optimization

Gapps not include – Rooted

Language support: Multilang

Install ROM:

CWM

1) Download the custom ROM copied to an external SD card root directory
2) Download the recovery.img ( put in your SD card )
3) Start MobileUncle Tools ( Download on Goolge play )
4) Select Update Recovery ( choose recovery.img )
5) Mobile reboot in CWM and follow the instructions( if recovery is in chinese look tutorial "CWM for MTK Platform" )
               Into the recovery:
            – Wipe Data / Factory Reset -> delete all user data
            – Wipe Cache Partition -> Wipe cache
- Return to recovery main interface Install zip from sdcard -> choose zip from sdcard -> Select your ROM
- Brush complete, restart the phone Patience required – first boot takes a while

↧

Pre-rooted Halo 7 Mod stock for Koobee P1S

Based on stock firmware of Halo 7 Build number V2.16 (March 21 2016)

Features :

1) Firmware flashable by SP Flash Tool 2) DEBLOATED 3) Added SuperSU version 2.76 4) Added Busybox version 1.24.2

PLEASE FOLLOW CAREFULLY ALL THE STEPS AT THE NEXT LINK :

1) Firmware flashable by SP Flash Tool
2) DEBLOATED
3) Added SuperSU version 2.76
4) Added Busybox version 1.24.2